Zeroflame – Fire protection made easy!
• Designed particularly for the non-specialist to use.
• Simple in specification.
• Uses traditional application methods.
• Instructions for obtaining 'Supply and Application' certificates are included with each pack enabling compliance with regulatory requirements.
• All products successfully tested to the relevant quality / regulatory standard.
• Available from Technical Paint Services NOW! Contact us.
Zeroflame Fire Retardant Treatment for wood
To say that Zeroflame Treatment is revolutionary is an understatement. This remarkable product:
• will protect timber substrates to Euro-class B certification standard. BS EN 13823 & BS EN 11925-2 Single Burning Item Euroclass B-s1-d0 (equivalent to UK "Class0" BS 475: Part 6/7). Euroclass C (equivalent to UK Class 1) for plywood.
• can be used internally and externally.
• is not effected by moisture when dry.
• is non-toxic and non-allergic.
- the list goes on!
Never before has there been such a simple product to use for the protection of timber against fire.
Zeroflame Treatment Health & Safety Data Sheet
Zeroflame Treatment Technical Data Sheet
Zeroflame Fire Retardant Varnish overcoat in matt eggshell gloss for wood
Like Zeroflame Treatment, Zeroflame Varnish has a number of distinctive features – the main one being that Class 0 Fire Propagation Protection can be achieved on timber surfaces in only two coats, resulting in not only a material saving but also a labour cost saving. Zeroflame Varnish, which is a three component product – a two-pack base coat and a single-pack finish, is supplied in a very simple package configuration – everything you need to treat 20m2 supplied in one box.
Zeroflame Varnish Base Coat Component A Health & Safety Data Sheet
Zeroflame Varnish Base Coat Component B Health & Safety Data Sheet
Zeroflame Varnish Finish Health & Safety Data Sheet
Zeroflame Varnish Technical Data Sheet
Zeroflame Fire Retardant Paint
Zeroflame Paint must be one of the most versatile fire protection coatings available on the market. It will achieve Class 1 and Class 0 on timber surfaces, it will maintain Class 1 and Class 0 on non-combustible surfaces such as plaster walls. It can be applied over sound existing coatings and can be over-coated with standard acrylic paints where a decorative finish is required.
Zeroflame Paint Health & Safety Data Sheet
Zeroflame Paint Technical Data Sheet
Zeroflame AquaSteel WB+ 30 & 60 minute fire protection for structural steel - out of one can!
Intumescent Coating for Structural Steel. Calculating the required material to achieve fire protection for structural steel normally involves the complicated and time consuming process of getting details of all the structural steel areas involved in the project and calculating the exact amount of material required for each. AquaSteel WB+ Intumescent Coating now combines the ability to protect all standard steel sizes and profiles for both 1/2 hour and 1 hour fire resistance in a single product.
 AquaSteel WB Facts & Figures
AquaSteel WB Health & Safety Data Sheet
AquaSteel WB Technical Data Sheet
AquaSteel WB Specification Sheet
This product is water based, non-hazardous and can be used in stable internal environments without a sealer coat. When used externally or in areas subject to intermittent wetting, appropriate finish coats must be used. AquaSteel is white but can be overcoated with a compatible product if a colour finish is required.
|
